Controlled evaporative self-assembly of polymer nanoribbons using oscillating capillary bridges

Evaporative self-assembly (ESA), based on the “coffee-ring” effect, is a versatile technique for assembling particle solutions into mesoscale patterns and structures on different substrates. ESA works with a wide variety of organic and inorganic materials, where the solution is a combination of volatile solvent and nonvolatile solute. Modified ESA methods, such as “stop-and-go flow coating,” use a programmed meniscus “stick–slip” motion to create mesoscale assemblies with controlled shape, size, and architecture. However, current methods are not scalable for increased production volumes or patterning large surface areas. We demonstrate a new ESA method, where an oscillating blade controls the meniscus depinning and drives the evaporative assembly of solutes at the pinned meniscus. Results show that oscillation frequency and substrate speed control time/distance intervals between successive meniscus depinning, and the assembly dimensions depend on solution concentration, oscillation frequency, substrate speed, and meniscus height. We report the mechanism of the meniscus depinning and the control over assembly cross-sectional dimensions. This advance provides a scalable ESA method with faster processing times and maintained advantages. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1545–1551     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

A novel method for serum lipoprotein profiling using high performance capillary isotachophoresis

A new capillary isotachophoresis (cITP) method for lipoprotein profiling with superior lipoprotein coverage compared to previous methods has been developed, resolving twice as many lipoprotein species (18 peaks/fractions) in serum or plasma in less than 9.5 min. For this, a novel mixture of 24 spacers, including amino acids, dipeptides and sulfonic acids, was developed and fine-tuned, using predictive software (PeakMaster) and testing of spiked serum samples. Lipoprotein peaks were identified by serum-spiking with reference lipoproteins. Compatibility with common lipophilic stains for selective lipoprotein detection with either UV/Vis or laser-induced fluorescence was demonstrated. A special new capillary with a neutral coating (combining water-compatible OV1701-OH deactivation and methylation) was used for the first time for electrodriven separations, allowing very stable separations in a pH 8.8–9.4 gradient system, being functional for more than 100 injections. Excellent reproducibility was achieved, with coefficients of variation lower than 2.6% for absolute migration times. Comparison was performed with human plasma samples analyzed by NMR, leading to similar results with cITP after multivariate statistics, regarding group-clustering and lipoprotein species correlation. The new cITP method was applied to the analysis of serum samples from a LDL receptor knock-out mice model fed either a normal diet or a western-type diet. Differences in the lipoprotein levels and in the sublipoprotein types were detected, showing a shift to more atherogenic particles due to the high cholesterol diet. In summary, this novel method will allow more detailed and informative profiling of lipoprotein particle subtypes for cardiovascular disease research.     

Influence of rheological additives on char formation and fire resistance of intumescent coatings

Styrene-butyl acrylate copolymer based fire retardant coatings were prepared using intumescent flame-retardant additives and mineral clay type rheological additives. Three different widely used nanoclays, organic-modified montmorillonite, palygorskite and sepiolite were applied in order to determine their effect on the flame retardancy. Significant differences were found when their heat-shielding activities were evaluated. It was observed that the addition of different clay particles in amount of 0.25 w% changes the char formation process; the height, the morphology, the structure and also the mechanical resistance of the protecting shield. The different geometry and composition of the additives induced different changes in fire performance. In case of palygorskite the catalytic effect of Fe accelerated mainly the thermal decomposition, therefore the fire resistance decreased. The plate-like montmorillonite reduced the extent of the intumescent char, whereas also improved the mechanical and sustained heat resistance of the fire protecting shield. The fibrous sepiolite of low Fe content assisted the development of efficient protecting shield, which exhibited optimal cell structure, suitable thickness, and thus ensured better heat-insulating performance. Consequently, fire retardant effect of sepiolite was found to be better than the other studied clay types.     

电泳沉积制备ZnO-C60和ZnO-MWCNT合涂层电极及其光电性质

在氧化铟锡( ITO)导电玻璃表面电泳沉积制备ZnO-C60和ZnO-MWCNT复合涂层电极,经后续热处理增强其结合强度,通过SEM观察2种电极复合涂层的表面形貌,并使用CHI 705电化学分析仪和PMI-E电致化学发光系统测定其光电性质.结果表明,ZnO-C60复合涂层电极具有较高的稳定性,在可见光辐照下,该电极显示...     

A combined redox-competition and negative-feedback SECM study of self-healing anticorrosive coatings

In this paper, the long-term anticorrosive efficiency of a damaged self-healing coating is studied for the first time using scanning electrochemical microscopy (SECM). In the study an epoxy-coating with embedded-capsules containing a silyl-ester is employed. The properties of the silyl-ester as a healing-agent for the protection of AA2024-T3 were evaluated by complementary SECM experiments operating in negative-feedback and redox-competition modes. The experimental approach here presented allowed for monitoring the early-stages of corrosion activity and subsequent healing mechanisms offered by the release of silyl-ester into a relatively large coating defect. This result was observed by detecting the transition of the oxygen reduction response from a redox-competition mode to a negative-feedback behavior. These measurements demonstrated that the silyl-ester is released efficiently after capsules break upon coating damage, covering relatively large areas and gradually healing the damaged-site hindering the corrosion processes and providing an effective protection for at least one month of immersion in chloride solution.     

Preparation of stable second‐order nonlinear optical films by sol–gel technique

A stable nonlinear optical (NLO) film containing “T” type alkoxysilane dye was prepared by sol–gel technology. This crosslinked “T” type alkoxysilane dye was synthesized and fully characterized by FTIR, UV–Vis spectra, and ¹H‐NMR. Followed by hydrolysis and copolymerization processes of the alkoxysilane with γ‐glycidoxypropyl trimethoxysilane (KH560) and tetraethoxysilane (TEOS), high quality inorganic–organic hybrid second‐order NLO films were obtained by spin coating. The “T” type structure of the alkoxysilane was found to be effective for improving the temporal stability of the optical nonlinearity due to the reduction in the relaxation of the chromophore in the film materials. Copyright © 2009 John Wiley & Sons, Ltd.     

毛细管电泳涂层研究进展

近年来,随着毛细管电泳与质谱、激光诱导荧光检测等联用技术的飞速发展,毛细管电泳技术在生命科学、环境保护、食品检验等领域得到广泛应用.对毛细管内壁进行涂层改性是提高毛细管电泳的分离效果和重现性,抑制分析物与毛细管内壁间吸附作用的最有效、最常用的方法.该文根据涂层材料的种类和制备机理,分别综述了近年来非共价键合和共价键合毛...